TOUCH-ON is a pressure washer, pump-spray, trigger, or bucket applied durable hydrophobic ceramic paint protection treatment that additionally has low-foaming, powerful detergency for most second stage bucket washes so that you can further clean the paint while simultaneously applying protection following TOUCH-LESS cleaning. Once applied, TOUCH-ON has dirt releasing properties too that works in conjunction with TOUCH-LESS in subsequent wash routines to produce superior contactless results. TOUCH-ON is water based, is not flammable nor contains alcohol or petrochemical solvents.

Directions:
SHAKE WELL BEFORE USE.

Vehicle must be cool and out of direct sunlight. Pre-wash with TOUCH-LESS cleaner to remove dirt or contamination on your paintwork. If further cleaning is required use AUTO-WASH concentrated shampoo and noodle wash mitt.

There are three methods that can be used to apply TOUCH-ON:

Pressure washer:
Add 30ml into washer or lance reservoir, top up to300ml with clean cool water. Shake well and applyunder pressure to entire vehicle. Immediately rinseusing pressure washer. Dry vehicle with amicrofibre cloth or similar. Alternatively, an airblower can be used.

Bucket:
Pour 30-60ml into a bucket then fill with 10 litres ofwarm water (preferably from a fast running tap), mixwell. Apply using noodle wash mitt, sponge orsimilar. Rinse with clean water. Dry with amicrofibre cloth or similar. Please note, this is not ahigh foaming bucket wash.

Trigger spray:
Add 30ml to trigger bottle and top up to 1 litre with(preferably demineralised/deionised) water. Shakewell. Trigger apply liberally, panel by panel, thenthoroughly rinse with pressure washer or hose. Drywith microfibre towel or air blower.

Car must not be allowed to air dry as water spottingmay occur.