Collinite Beadcoat is an easy to use sealant featuring an SiO2 graphene structure. It provides ultra-durable hydrophobic protection and a high gloss, super slick finish to a variety of automotive exterior surfaces.

Featuring a functional ceramic-graphene resin structure, this easy-to-use formula provides 6 months of stand-alone paint protection and UV/detergent-resistant shine. Beadcoat can also be used to enhance & preserve an existing ceramic or graphene coating. Safe for paint, glass, wheels & trim.

Directions:

Always test product first in a small, inconspicuous area to ensure desired result.

For optimal bond/protection, ensure surface is free of above-surface contamination; this can be achieved with iron remover and clay process (towel or bar). Below-surface paint imperfections (swirls/ scratches/marring) should be removed by DA Polish (e.g. Collinites No. 390)

As a lubricating drying aid: Following a wash, while vehicle surface is still wet, apply 2 sprays of Beadcoat to one 3×3 ft panel at a time. Using a microfibre towel, wipe entirety of panel until dry. Flip towel as necessary, and change towels as they become saturated. Repeat process on all painted surfaces (and glass). *This process is only recommended if a previous base coat of Beadcoat has been applied.

Please note: Not for use on contaminated surfaces; untreated by iron (chemical) or clay (mechanical) processes, interior surfaces, tyres, or hot surfaces. Do not apply over a wax or sealant.

Features:

• 6 months of stand-alone paint protection
• Extreme hydrophobic beading effect
• Applied over ceramic coatings, paint protection film
• For paint, glass, wheels, exterior trim
• Easy wipe on-wipe off high gloss shine
• Drying aid (once a base layer is applied)
• UV and detergent resistant
• Average Spread/Coverage: 600-1,000 sq ft

Size:: 16oz (473ml with trigger) or 64oz (1.89 Litre) Jerry Can