Angel Tears is an innovative coating agent that protects the paint surface from external contaminants. Angel Tears delivers an outstanding aesthetically pleasing coating, affording a longer working time and greater ease of use to experienced users and beginners alike. Angel Tears proprietary formula, infused with hard-bonding ceramic nanoparticles, creates a coating protective layer that repels water and microcontamination and resists chemical damage and abrasion. Angel Tears can be used effortlessly on all types of non-coated exterior vehicle surfaces.

Features:

• High-quality ingredients.
• Safe on all exterior surfaces.
• Innovative design.
• Excellent hydrophobicity.
• Up to 24-36 months of protection.

How- to use:

For maximum results:

• Clean and prep the surface, removing all potential contamination or protection.
• Perform paint correction.
• Use Reborn as a preparation spray.
• Shake bottle well.
• Apply a few drops onto the applicator, ensuring complete coverage.
• Work with one panel at a time. Apply coating in long, straight lines, overlapping each line by 20%. If your layers are noticeably thin or do not remain visible, carefully add more coating.
• Angel Tears will create a bubbling effect, manifesting the process of evaporation of solvents. The wiping time varies according to the temperature and the ambient humidity which can range from +/- 45 seconds to a few minutes.
• When the coating has flashed, use a fresh microfiber towel to wipe away coating and you should feel a slight resistance when its ready. Flip towel and repeat.
• Repeat the steps for the following sections. A second layer is not necessary, but can be applied inside a 4 to 12 hours following the installation of the first layer.
• Once finished, thoroughly clean the inside of the cap and the top of the lid. Close the bottle and put it back in the box (away from sun) for future use. Once opened, it is best to use the ceramic within 6 months.

Tips:
Wiping the ceramic too early will remove too many ceramic particles and greatly reduce the slickness effect on the paint. You will want to feel aSLIGHTresistance under the microfiber when wiping, without having difficulty leveling the ceramic during the first pass of the microfiber. We recommend walking the vehicle in various lighting to ensure no high-spots are left behind. Keep out of the elements for 48 hrs. Replace the applicator sheet roughly every 15 minutes as the suede hardens. Install in a temperature-controlled environment.