**NEW HYPER STRENGTH** Thick, intense pre-cleaning snow foam.

We get asked a thousand times a day, “Can you mix Frst and Sn?” Well now, you can – and you don’t have to spend your money on two products. Combining the cleaning power of Frst with the thick, long dwell time of Sn, we present Sn X.

Apply it via a professional snow foam cannon with a pressure washer capable of 130bar or more for best results. Cover your car from the bottom upwards to increase the dwell time of the product on those dirty lower areas. A little slip to the snow foam will help carry most of the dirt away. To use, simply add approximately 50ml to your snow foam cannon’s 1 litre dosing bottle and top up with water. Then see the incredible cleaning effects of that thick, luxuriant foam. You probably won’t use all the mixture on a single car. We reckon a litre of concentrate is good for 20-40 pre-washes.

Buy our other new product – Gl Hydrophobic Snow Foam

Note that this product is NOT pH-neutral and is far stronger than regular Sn in chemical terms. Therefore, it should be used with caution on sensitive finishes and never be allowed to dry on the car. If in doubt, use regular Sn instead (the safer option).

How to Use
Application: Apply Sn X at 50ml-100ml per litre of water via a professional snow foam cannon using a pressure washer with at least 130bar for best results. If using a lower-powered washer, a stronger mix may be necessary.

Coverage: Start from the bottom and work your way up to increase dwell time on the dirtiest areas.

Rinse: Allow the foam to dwell for a short while, then rinse thoroughly with water. Do not allow to dry on the panel and use with care on sensitive finishes (no dwell time, maximum rinsing). Plastic and metal trim may be affected by strong chemicals. Use regular Sn if unsure.

Mixing Instructions
1L Bottle: 50ml-100ml dose; good for creating 20+ litres of snow foam mixture, enough for 30-40 car washes.